MOTORISED OUTDOOR AWNINGS
Folding Arm Awnings are ideal as a roll-away cover for a patio, deck, balcony or commercial applications such as restaurants.
With a folding arm awning you can create an outdoor room that protects against the sun or light rain.
In folding arm awnings the arms fold horizontally instead of vertically as in other awnings. Folding Arm Awnings need no posts or vertical supports and therefore the area can remain clear and unobstructed with no intrusive posts. When the awning is retracted the space is free of any structure.
Ozsun outdoor roll up blinds and awnings are designed for heat control and can be either manually rolled up or automated according to the angle of the sun.
Ozsun offers a large range of folding arm awnings. We are based in Sydney but the awnings can be shipped anywhere in Australia.
Here are the key differences between folding arm awning models.
Ozsun’s premium Helioshade range of retractable folding arm awnings are the only folding arm awnings engineered to withstand winds of up to category six (48km/hr) on the Beaufort wind scale. The Helioshade folding arms are made in Austria and incorporate four cables in each arm for superior performance.
Helioshade Folding Arm Awnings
Helioshade Full Cassette
Helioshade Full Cassette folding arm awnings are the ultimate in design and functionality when it comes to folding arm awnings. Totally enclosed when retracted it gives you the utmost protection against the elements.
Helioshade Fabric Cassette
Helioshade Fabric Cassette folding arm awnings are the ultimate in strength and versatility when it comes to folding arm awnings. The elegant and compact semi-cassette awning effectively protects the awning fabric from moisture and dust.
When modern architecture calls for slim and compact the Helioshade Cocoon Cassette awning offers the ideal shading solution.
The Helioshade Rubix folding arm awning is a full cassette awning made by the Haas Group in Austria. Sleek lines and contemporary design of the Helioshade Rubix cassette conceals not only the fabric and arms but also the mounting brackets are fully concealed when retracted.
Folding Arm Awning Information
Folding Arm Awning Installation
Folding arm awnings can be mounted onto the face of a building. On a brick wall seven courses of bricks are necessary above the awning.
With the addition of fascia or eave brackets, a folding arm awning can be installed from the rafters of the roof where there are insufficient courses of bricks in the wall to support the awning. The fascia brackets are installed by cutting a slot in the fascia just below the gutter. The bracket is pushed in through the slot and bolted to the adjacent rafter. The folding arm awning is then attached to these brackets. This effectively ‘ties’ the folding arm awning to the roof structure. In addition to being a very secure way to fit the folding arm awning, it allows the awning to be mounted up high near the gutter.
In the Sydney region we offer a complete installation service.
Folding Arm Awning Operation
The maximum width of a folding arm awning is 25 metres and the maximum projection is 4.0 metres. The width of the awning must be 500mm wider than the arm projection to allow the arms to fold, with the exception of the unique Stratos 1 oversquare folding arm awning.
A folding arm awning can be operated either by a crank handle or electric motor but electric motors are recommended where the awning has more than two arms (greater than 6 metres in width). The tubular awning motor is concealed within the tube that the fabric rolls onto. When motorised the awning is operated with a remote control which can be handheld or wall-mounted.
A folding arm awning should be rolled away whenever the wind seems to be moving the awning too much and it should never be left extended whilst the house is unattended. An automatic wind sensor can provide a degree of protection. It will roll the awning away when the wind exceeds a preset level. While the wind sensor provides protection in most conditions, a sudden extreme gust of wind could damage an awning before it can retract. This is particularly the case for an awning with a large projection or drop which takes some time to retract.
Folding Arm Awning Pitch
The slope (pitch) of the folding arm awning can be adjusted with an allen key. Customer adjustable pitch control via a crank handle is available as an extra option on the Helio Classic folding arm awning and the Neo folding arm awning.
If sufficient slope can be obtained, a folding arm awning will withstand light showers but it should be considered as a sunscreen rather than as a retractable roof due to wind restrictions. Ideally, the awning requires a minimum pitch of 15 degrees to ensure that rainwater will not pool on the fabric.
|Projection of the awning arms (m)||1.5||2.0||2.5||3.0||3.5||4.0|
|Fall required to achieve a 15-degree pitch on the awning (cm)||40||54||67||80||94||107|
Folding Arm Awning Experience
We have gained a great deal of experience installing folding arm awnings in Sydney for over 20 years in both domestic and commercial applications.
Folding arm awnings are our main business, although we also offer a range of other awning types – if you go to the awnings page you can see some of the other styles of awnings listed.
If you live in Sydney we offer a free home consultation to assess whether a folding arm awning or another type of awning is going to best suit your requirements and budget.